Raspberry Pi Connect • Re: most likely me (or Manjaro), but why are the...
That's a f ascinating error.I don't have a comparable system to hand to f ind more information on the issue, however I'll be keeping an eye out for more errant f ont ef f ects.My best guess is that...
View ArticleRaspberry Pi Connect • Re: Unable to connect, Timeout opening data channel
At first glance, it looks like you're on a particularly restrictive network - one that doesn't even allow STUN servers to operate, which is causing to to time out getting connection establishment...
View ArticleGeneral discussion • Re: New Raspberry Pi Products
All third party products with dual M.2 slot I have seen so far were using PCIe Gen2 switches --> lower performance. Sure, one can use NVMe in addition ... at lower performance as well.The Hailo...
View ArticleGeneral discussion • Re: old libraries of GPIO not working on pi 5
the libraries such as adafruit dht 22 and many other are not compatable with pi 5 due to the rp1 chip i am regretting that i bought it instead of pi4 can anyone tell me how long i have to suffer or is...
View ArticleTroubleshooting • Re: Raspberry Pi imager is not working. How can I install...
Raspberry Pi imager keeps giving me the message "Error writing file to disk" while trying to install Ubuntu. How do I install it manually to a micro SD card so that I can use it?Is your target RPi...
View ArticleGraphics, sound and multimedia • Re: Map of RPi5 HVS registers
Thank you so much for the help.It turns out `/sys/kernel/debug/dri/1` is full of useful information, especially the `hvs_regs` and `state` files.I still haven't quite got my head around how/why the...
View ArticlePython • Re: Installing MARIADB on Bookworm with Python
OK, I tried it but it did not seem to work. Here is the output:xxx@S1234:~$ mkdir My_PythonAppsxxx@S1234:~$ cd My_PythonAppsxxx@S1234:~/My_PythonApps$ sudo python3 -m venv --system-site-packages...
View ArticleGeneral discussion • Re: Don't move windows when powering on monitor
Some displays deassert hotplug (i.e. signal through the hdmi cable they are no longer connected) when put into standby. Some do not.In general not doing this is highly preferred.Wayland when presented...
View ArticleAdvanced users • Re: Pi5 - H.264 with YUV444 colorspace
Thanks, hmm - I thought I did read in the specs that H.264 hardware decoding was supported. I will re-check. Does Pi4 supports H.264 hardware decoding?Statistics: Posted by RubenSpruijt — Tue Aug 06,...
View ArticleTroubleshooting • Lxterminal not displaying foreign characters
I am multilingual and having a terminal incapable of working with foreign characters is CRIPPLING.Although I did this during Pi setup (Bullseye), I ran again this:Code: sudo dpkg-reconfigure localesI...
View ArticleTroubleshooting • Re: RPi used a bridge is not stable
I recently configured a Pi3B+ like you describe/want, but not in bridge-mode but routed-mode. (I just wanted a method and backup internet to prove that some regional government website is not...
View ArticleFor sale • Re: Can I do a NVMe hat give away here?
My feedback: make opportunities to participate convenient. To benefit from your 'Prize Draw' would need me to be online at 02.00 am local time here in the UK. That's not going to happen...It's...
View ArticleTroubleshooting • Re: Is this symptomatic of a failing SD card?
Further to this, I've got a new card and installed Bullseye 32 bit on it. Full GUI. I've put my application on it. And guess what? It doesn't run.I use 2 serial ports : '/dev/serial0' which is...
View ArticleTroubleshooting • Re: RPi5 only boots to RPi OS
PINN is not an OS itself,Actually, PINN *is* an OS. It is a specialized OS whose purpose is (primarily) to install other OSes.The point is that if nothing else, you should be able to install PINN on...
View ArticleBeginners • Re: Raspberry pi 4+ HDMI enable
What I don't understand is how to update the boot of the rpi4 with the raspi-config option. Is it necessary to remove the sd from the pi? I don't understand anything, sorry. Ambien I'll try another...
View ArticleGeneral discussion • Re: Auto output to HDMI on startup question
For example upon startup the pi runs a colour bar generator and outputs that on HDMI 1 and simultaneously runs the current time and outputs that on HDMI 2?Nitpick... There is no 'HDMI 2". There is...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Raspberry Pi 3 B+ - Install TZT 1.54...
If you're interested in getting your screen running you should have tested what I've linked you to or followed the process described in the other link.Sorry, but I'm not offering Free-of-cost...
View ArticleClik here to view.
Other projects • Vintage Phone Pi4
Hello all !I have one dusty Rpi4 that I used for many years as a server and now I have an idea to bring it back to life.I have a restaurant and by the entrance there is a small telephone cabin. My...
View ArticleRaspberry Pi OS • Re: GCC 14.1.0 with Bookworm on RPI5
My script just does the wget once at the start.Hi there, I apologize for bumping this thread. That said, I have been trying to use your script to build an older version of GCC (before 11.0) on my Pi4B...
View ArticleTroubleshooting • Symptom: Raspberry Pi3 does not maintain stable wlan0...
OS: Raspberry Pi OS Bookworm Lite (64 Bit)Platform: RPi 3 B+Issue: after several hours of operation, all of the Pi3 on the network lose wifi connectivity (see log below). Pi4 on 5GHz are not impacted....
View Article
