Yes. Solder. But if you are using the hardware several times you probably want to inspect it for fatigued wires as there is probably a lot of vibration during the fight.
Here's one way to expose the header pins so that you don't have to solder directly to the Pi.
https://thepihut.com/products/breakout-pizero
Here's one with screw terminals:
https://thepihut.com/products/mini-term ... spberry-pi
However, that will add bulk and weight. You'll also have to inspect the terminals to make sure they haven't loosened after a flight, or put a dab of nail varnish on the screws.
Here's one way to expose the header pins so that you don't have to solder directly to the Pi.
https://thepihut.com/products/breakout-pizero
Here's one with screw terminals:
https://thepihut.com/products/mini-term ... spberry-pi
However, that will add bulk and weight. You'll also have to inspect the terminals to make sure they haven't loosened after a flight, or put a dab of nail varnish on the screws.
Statistics: Posted by ame — Wed Oct 09, 2024 9:54 pm
